Hi all,I'm trying to establish a link between the analog PABX in a small Wellington office and a small Auckland office.I have two SPA3102 that i have conected to a spare extention on each PABX (into the line port on the SPA).Im trying to configure it so that when the extension of the SPA is dialed it will transfer to the other office SPA which would dial the extenion listed in the dialplan.The connection looks like this: Wgtn PABX > Wgtn SPA3102 > Wgtn Modem/Router > WWW > AKL Modem/Router > Akl SPA3102 > Akl PABX.I think i need to have a different port between the Line and PSTN tab but would like some expert guidance, thus the reason for my post.Many thanks in advance for any help, will reduce the size of the lump on my head from smacking it against a wall.Configuration as followsWgtn Office - 192.168.1.41, port forward 5064 to 192.168.1.41.Line 1 tabLine Enable: YesSip port: 5064Proxy: [AKL Office WAN IP]Register: YesUserID: WgtnOfficeUse Auth ID: YesAuth ID: WgtnOfficePassword: secretDial Plan: (S0<:AklOffice@AKL Office WAN IP:5064>)Enable IP Dialing: YesPSTN Line tabLine Enable: YesSip Port: 5064Proxy: [AKL Office WAN IP]Register: YesUserID: WgtnOfficeUse Auth ID: YesAuth ID: WgtnOfficePassword: secretDial Plan 1: (S0<:AklOffice@Akl Office WAN IP:5064>)Dial Plan 2: (<201>S0)Voip-to-pstn enable: YesVOIP Caller Auth Method: HTTP DigestLine 1 VOIP Caller DP:2VOIP User 1 Auth ID: AklOfficeVOIP User 1 DP: 2Voip User 1 Password: secretPSTN-to-Voip enable: YesPSTN ring thru line 1: YesPSTN Caller Default DP: 2FXO answer delay: 0PSTN answer delay: 0Akl Office - 192.168.1.124, port forward 5064 UDP to 192.168.1.124.Line 1 tabLine Enable: YesSip port: 5064Proxy: [Wgtn Office WAN IP]Register: YesUserID: AklOfficeUse Auth ID: YesAuth ID: AklOfficePassword: secretDial Plan: (S0<:WgtnOffice@Wgtn Office WAN IP:5064>)Enable IP Dialing: YesPSTN Line tabLine Enable: YesSip Port: 5064Proxy: [Wgtn Office WAN IP]Register: YesUserID: AklOfficeUse Auth ID: YesAuth ID: AklOfficePassword: secretDial Plan 1: (S0<:WgtnOffice@Wgtn Office WAN IP:5064>)Dial Plan 2: (<301>S0)Voip-to-pstn enable: YesVOIP Caller Auth Method: HTTP DigestLine 1 VOIP Caller DP:2VOIP User 1 Auth ID: WgtnOfficeVOIP User 1 DP: 2Voip User 1 Password: secretPSTN-to-Voip enable: YesPSTN ring thru line 1: YesPSTN Caller Default DP: 2FXO answer delay: 0PSTN answer delay: 0
↧